BS EN 1670-2007 Building hardware - Corrosion resistance - Requirements and test methods
|
ID： |
50A76E57E6264BABBE96EF5106E27E7E |
|
文件大小(MB)： |
0.23 |
|
页数： |
14 |
|
文件格式： |
|
|
日期： |
2008-8-25 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
BRITISH STANDARD BS EN,1670:2007,Building hardware —,Corrosion resistance —,Requirements and test,methods,The European Standard EN 1670:2007 has the status of a,British Standard,ICS 91.190, , , ,Licensed Copy: AUB User, na, Fri Sep 21 16:26:30 GMT+00:00 2007, Uncontrolled Copy, (c) BSI,BS EN 1670:2007,This British Standard was,published under the authority,of the Standards Policy and,Strategy Committee,on 31 May 2007,. BSI 2007,ISBN 978 0 580 50808 0,National foreword,This British Standard was published by BSI. It is the UK implementation of,EN 1670:2007. It supersedes BS EN 1670:1998 which is withdrawn.,The UK participation in its preparation was entrusted by Technical Committee,B/538, Doors, windows, shutters, hardware and curtain walling, to,Subcommittee B/538/4, Building hardware.,A list of organizations represented on this committee can be obtained on,request to its secretary.,This publication does not purport to include all the necessary provisions of a,contract. Users are responsible for its correct application.,Compliance with a British Standard cannot confer immunity from,legal obligations.,Amendments issued since publication,Amd. No. Date Comments,Licensed Copy: AUB User, na, Fri Sep 21 16:26:30 GMT+00:00 2007, Uncontrolled Copy, (c) BSI,EUROPEAN STANDARD,NORME EUROPéENNE,EUROP腎SCHE NORM,EN 1670,March 2007,ICS 91.190 Supersedes EN 1670:1998,English Version,Building hardware - Corrosion resistance - Requirements and,test methods,Quincaillerie pour le batiment - Résistance à la corrosion -,Exigences et méthodes d'essai,Schl鰏ser und Baubeschl鋑e - Korrosionsbest鋘digkeit -,Anforderungen und Prüfverfahren,This European Standard was approved by CEN on 12 February 2007.,CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European,Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national,standards may be obtained on application to the CEN Management Centre or to any CEN member.,This European Standard exists in three official versions (English, French, German). A version in any other language made by translation,under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the,official versions.,CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.,EUROPEAN COMMITTEE FOR STANDARDIZATION,COMITé EUROPéEN DE NORMALISATION,EUROP腎SCHES KOMITEE FüR NORMUNG,Management Centre: rue de Stassart, 36 B-1050 Brussels,. 2007 CEN All rights of exploitation in any form and by any means reserved,worldwide for CEN national Members.,Ref. No. EN 1670:2007: E,Licensed Copy: AUB User, na, Fri Sep 21 16:26:30 GMT+00:00 2007, Uncontrolled Copy, (c) BSI,EN 1670:2007 (E),2,Contents Page,Foreword..3,Introduction 4,1 Scope.5,2 Normative references ..5,3 Terms and definitions..6,4 Classification6,5 Requirements 6,5.1 General .6,5.2 General test requirements.6,5.3 Functional acceptance condition .7,5.4 Appearance acceptance condition..7,5.4.1 General .7,5.4.2 Degree of rust7,5.4.3 Degree of blistering ..7,6 Test conditions7,6.1 General conditions.7,6.2 Treatment following the corrosion test 8,7 Marking 8,Annex A (informative) Examples of service conditions for which the various grades of,corrosion resistance are appropriate 9,Bibliography 10,Licensed Copy: AUB User, na, Fri Sep 21 16:26:30 GMT+00:00 2007, Uncontrolled Copy, (c) BSI,EN 1670:2007 (E),3,Foreword,This document (EN 1670:2007) has been prepared by Technical Committee CEN/TC 33 “Doors,windows, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR.,This European Standard shall be given the status of a national standard, either by publication of an,identical text or by endorsement, at the latest by September 2007, and conflicting national standards,shall be withdrawn at the latest by September 2007.,This document supersedes EN 1670:1998.,CEN/TC 33 have considered previous comments by CEN/TC 262, thereby replacing this European,Standard with a new one based solely on the performance testing of building hardware.,The current version has been revised to incorporate clarification of the scope, definitions,requirements and acceptance criteria throughout Annex……
……